| Model |
CW9174E |
| Software |
Cisco IOS® XE Software Release 17.18.2 or later |
| Cisco Meraki MR32.1.5 or later |
| Supported wireless LAN controllers |
Catalyst and Cisco Wireless 9800 Series Wireless Controllers (physical or virtual) |
| Catalyst 9000 switches with Embedded Wireless Controller in SD-Access mode |
| 802.11be |
4x4 uplink/downlink multiuser Multiple-Input Multiple Output (MU-MIMO) with four spatial streams (5 GHz, and 6 GHz), 2x2 with two spatial streams (2.4 GHz) (or) |
| 4x4 uplink/downlink MU-MIMO with four spatial streams (2.4 GHz and 5 GHz) |
| 4096 QAM |
| Multilink operation |
| Preamble puncturing |
| Uplink/downlink OFDMA |
| Target Wake Time (TWT) |
| BSS coloring |
| Maximal Ratio Combining (MRC) |
| 20-, 40-, 80-, 160-, and 320-MHz channels (6 GHz) |
| 20-, 40-, 80-, and 160-MHz channels (5 GHz) |
| 20-MHz channels (2.4 GHz) |
| PHY data rates up to ~17.5 Gbps (4x4 320 MHz on 6 GHz, 4x4 160 MHz on 5 GHz, and 2x2 20 MHz on 2.4 GHz) or PHY data rates up to ~6.5 Gbps (4x4 160 MHz on 5 GHz, 4x4 20 MHz on 2.4 GHz) |
| Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) |
| 802.11 Dynamic Frequency Selection (DFS) |
| Cyclic Shift Diversity (CSD) support |
| Wi-Fi Protected Access 3 (WPA3) support |
| 802.11ax |
4x4 uplink/downlink MU-MIMO with four spatial streams (5 GHz, and 6 GHz), 2x2 with two spatial streams (2.4 GHz) (or) |
| 4x4 uplink/downlink MU-MIMO with four spatial streams (2.4 GHz and 5 GHz) |
| Uplink/downlink OFDMA |
| 1024 QAM |
| TWT |
| BSS coloring |
| MRC |
| 802.11ax beamforming |
| 20-, 40-, 80-, and 160-MHz channels (5 and 6-GHz) |
| 20-MHz channels (2.4-GHz) |
| PHY data rates up to ~10 Gbps (4x4 160 MHz on 6 GHz, 4x4 160 MHz on 5 GHz, and 2x2 20 MHz on 2.4 GHz) or PHY data rates up to 5.4 Gbps (4x4 160 MHz on 5 GHz, 4x4 20 MHz on 2.4 GHz) |
| Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
| 802.11 DFS |
| CSD support |
| WPA2/WPA3 support |
| 802.11ac |
● 4x4 downlink MU-MIMO with 4x4 spatial streams |
| ● MRC |
| ● 802.11ac beamforming |
| ● 20-, 40-, 80-, and 160-MHz channels |
| ● PHY data rates up to 1.7 Gbps (4x4 160 MHz on 5 GHz) |
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
| ● 802.11 DFS |
| ● CSD support |
| ● WPA2/WPA3 support |
| 802.11n version 2.0 (and related) capabilities |
● 4x4 MIMO with four spatial streams |
| ● MRC |
| ● 802.11n and 802.11a/g beamforming |
| ● 20- and 40-MHz channels |
| ● PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) |
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
| ● 802.11 DFS |
| ● CSD support |
| External Antenna |
Cisco Wireless 9174E |
| ● Omni-Directional Antenna (CW-ANT-T-O2-D8) |
| ● 2.4 GHz: Peak gain 2 dBi, omnidirectional in azimuth |
| ● 5 GHz: Peak gain 5 dBi, omnidirectional in azimuth |
| ● 6 GHz: Peak gain 5 dBi, omnidirectional in azimuth |
| ● IoT: Peak gain 2 dBi, omnidirectional in azimuth |
| ● Directional Antenna (CW-ANT-T-D2-D8) |
| ● 2.4 GHz: Peak gain 6.6 dBi, (75x75) directional |
| ● 5 GHz: Peak gain 5.7 dBi, (75x75) directional |
| ● 6 GHz: Peak gain 5.7 dBi, (75x75) directional |
| ● IoT: Peak gain 6.0 dBi, (75x75) directional |
| Interfaces |
● 1x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45) |
| ● Management console port (RJ-45) with default speed of 115,200 bps |
| ● USB 2.0 at 9W |
| ● DC power jack, 54V, for use with MA-PWR-50WAC power adapter |
| Incorporated radios |
● Dedicated IoT radio |
| ● dedicated tri-band scanning radio |
| Indicators |
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
| Dimensions(W x L x H) |
● 9174E access point (without mounting brackets): |
| ◦ 8.9 x 8.9 x 1.95 in. (22.6 x 22.6 x 4.9 cm) |
| Weight |
Cisco Wireless 9174E |
| ● 3.26 lb. (1.47 kg) |
| Input Power |
CW9174E: 802.3bt (UPOE), 802.3at (PoE+), 802.3af (PoE) or DC power |
| Power consumption |
CW9174E |
| Power source |
Idle |
Typical |
| 802.3at (POE+) |
12.6W |
17.6W |
| Note: Actual power consumption may vary depending on access point usage. Typical power consumption assumes the access point is passing traffic* during typical business hours and is idle during off-business hours. Business hours are assumed to be 11 hours a day, 6 days a week. |
| * Test conditions: |
| (PoE): The 6-GHz and 5-GHz bands both operating at 160 MHz passing 200 Mbps per band of download traffic and the 2.4-GHz band operating at 20 MHz passing 50 Mbps of download traffic; USB disabled; 2.5G Ethernet port; ambient temperature 25˚C (77°F). |
| Environmental |
Cisco Wireless 9174E |
| ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) |
| ● Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4570 m) |
| ● Operating temperature: -4° to 122°F (-20° to 50°C) |
| ● Operating humidity: 10% to 90% (noncondensing) |
| ● Operating altitude test: 50°C (122°F) at 9843 ft (3000 m) |
| Available transmit power settings |
Cisco Wireless 9174E |
| 2.4 GHz |
5 GHz |
6 GHz |
| 4x4: |
● 23 dBm (200 mW) |
● 23 dBm (200 mW) |
| ● 23 dBm (200 mW) |
● -4 dBm (0.39 mW) |
● -4 dBm (0.39 mW) |
| ● -4 dBm (0.39 mW) |
|
Note: In countries where use of the 6-GHz band is not allowed or there is no current software support, the 6-GHz radio will be disabled. The radio may be enabled with future software once the product is certified to operate in 6 GHz for that country. |
| 2x2: |
|
|
| ● 20 dBm (100 mW) |
|
|
| ● -4 dBm (0.39 mW) |
|
|
| Certifications |
● Wi-Fi Alliance: Wi-Fi 7 (R1), Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security |
| ● Bluetooth SIG: Bluetooth Low Energy |
Ăng-ten định hướng của Cisco Wireless CW9174E có thông số nổi bật nào?
CW9174E hỗ trợ ăng-ten định hướng CW-ANT-T-D2-D8 với góc phủ 75° × 75°. Mức tăng ích cực đại đạt 6,6 dBi ở băng tần 2.4 GHz, 5,7 dBi ở băng tần 5 GHz và 6 GHz, đồng thời 6,0 dBi cho radio IoT. Nhờ tập trung năng lượng theo một hướng, loại ăng-ten này giúp mở rộng khoảng cách phủ sóng, cải thiện cường độ tín hiệu và hạn chế nhiễu từ các khu vực không cần phục vụ, đặc biệt phù hợp cho môi trường doanh nghiệp có yêu cầu phủ sóng chính xác.
Lợi ích của việc sử dụng Access Point có ăng-ten ngoài như CW9174E so với ăng-ten tích hợp là gì?
Việc sử dụng ăng-ten ngoài cho phép tùy chỉnh vùng phủ sóng theo yêu cầu thực tế. Người quản trị có thể lựa chọn loại ăng-ten phù hợp với từng môi trường, thay đổi khi cần mở rộng hệ thống hoặc tối ưu tín hiệu mà không phải thay thế toàn bộ Access Point. Điều này giúp CW9174E linh hoạt hơn khi triển khai trong nhà xưởng, trung tâm logistics, sân vận động hoặc các khu vực có yêu cầu phủ sóng đặc biệt.
Cisco Wireless CW9174E hỗ trợ những loại ăng-ten ngoài nào và phù hợp với từng môi trường triển khai ra sao?
CW9174E hỗ trợ hai loại ăng-ten ngoài gồm ăng-ten đa hướng (CW-ANT-T-O2-D8) và ăng-ten định hướng (CW-ANT-T-D2-D8). Ăng-ten đa hướng phát sóng theo mọi hướng, phù hợp với khu vực mở như văn phòng hoặc sảnh lớn. Trong khi đó, ăng-ten định hướng tập trung tín hiệu theo góc 75° × 75°, thích hợp cho hành lang, nhà kho hoặc các khu vực cần phủ sóng theo một hướng cụ thể, giúp tăng cường chất lượng tín hiệu và giảm nhiễu.