| Model |
IW9165DH-ROW-URWP |
| Software |
● Cisco Unified Industrial Wireless Software Release 17.12.1 or later |
| Antennas |
● Directional: |
| ◦ Peak gain 15 dBi, internal antenna, dual polarization, azimuth beamwidth 30 deg, elevation beamwidth 30 deg, frequency: 4900 to 5925 MHz |
| ◦ BLE antenna gain: 4 dBi, internal antenna, vertical polarization, omnidirectional |
| ● External: |
| ◦ 2x N-Type antenna ports |
| ◦ 1x TNC GNSS antenna port |
| ◦ Certified for use with antenna gains up to 15 dBi (5 GHz) |
| ◦ Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios. |
| ◦ Supports Self-Identifiable Antennas (SIA) |
| Interfaces |
● 1x 100M/1000M/2.5G Multigigabit Ethernet (RJ45)/M12 X-code autosensing PoE+ in (802.3af/at), UPOE in |
| ● 1x 100M/1000M/1G (RJ45)/M12 Xcode |
| ● Management console port (RJ45) |
| ● Multicolor system LED |
| ● DC power input (micro-fit/M12 A-code) |
| ● Reset button |
| Note: PG 13.5 glands or M12 adapters shall be used with Ethernet and power interfaces to meet IP67 rating. |
| Dimensions (W x L x H) |
● 7.2 x 3.6 x 7.1 in (18.3 x 9.1 x 18.0 cm) |
| Weight |
● 4.4 lb. (2.0 kg) |
| Mounting Options |
● Pole (± 25° vertical tilt and ± 45° slant) |
| Input power requirements |
● 802.3af (PoE), 802.3at (PoE+) |
| ● DC power source: 24 to 48 VDC (maximum voltage range: 16.8 to 60 VDC) |
| ● Cisco power AC-DC power adapter, IW-PWRADPT-MFIT4P= |
| ● Cisco power injector, IW-PWRINJ-60RGDMG= |
| Surge |
● Surge protection to ± 2 kV (line-earth) and ± 1 kW (line-line) on DC power input |
| ● Surge protection to ± 4 kV on Ethernet ports |
| Environmental |
● Nonoperating (storage) temperature: - 40° to +185°F (-40° to +85°C) |
| ● Nonoperating (storage) altitude test: +25°C (77°F), 15,000 ft. |
| ● Operating temperature: -40° to +140°F (-40° to +60°C) with solar load and still air |
| ● Extended operating temperature (DC powered): -58° to +167°F (-50° to +75°C) without solar loading, still air, and cold start limited to -40°C (-40°F) |
| ● Operating type test: +85°C (185°F) for 16 hours |
| ● Operating humidity: 0% to 95% (noncondensing) |
| ● Operating altitude: 15,000 ft. (4,500 m) |
| ● Wind resistance: Up to 160 mph (257 km/h) sustained winds |
| Environmental ratings |
● EN/IEC 60529 (IP66 and IP67) |
| System memory |
● 2048 MB DRAM |
| ● 1024 MB flash |
| Data rates supported |
5 GHz radio: |
| ● 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| ● 802.11n: HT20 and HT40, MCS0 to 15 |
| ● 802.11ac: |
| ◦ VHT20 MCS0 to 8, 1 or 2 spatial streams |
| ◦ VHT40 and VHT80 MCS0 to 9, 1 or 2 spatial streams |
| ● 802.11ax: |
| ◦ HE20, HT40, and HE80 MCS0 to 11, 1 or 2 spatial streams |
| 5/6 GHz radio: |
| ● 802.11a (5 GHz band only): 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| ● 802.11n (5 GHz band only): HT20 and HT40, MCS0 to 15 |
| ● 802.11ac (5 GHz band only): |
| ◦ VHT20 MCS0 to 8, 1 or 2 spatial streams |
| ◦ VHT40, VHT80, VHT160 MCS0 to 9, 1 or 2 spatial streams |
| ● 802.11ax: |
| ◦ HE20, HT40, HE80, and HE160 MCS0 to 11, 1 or 2 spatial streams |
| Maximum number of nonoverlapping channels |
5 GHz |
6 GHz* |
| ● 802.11a: |
● 802.11ax: |
| ◦ 20 MHz: 25 |
◦ 20 MHz: 41 |
| ● 802.11n: |
◦ 40 MHz: 20 |
| ◦ 20 MHz: 25 |
◦ 80 MHz: 9 |
| ◦ 40 MHz: 12 |
◦ 160 MHz: 4 |
| ● 802.11ac/ax: |
|
| ◦ 20 MHz: 25 |
|
| ◦ 40 MHz: 12 |
|
| ◦ 80 MHz: 6 |
|
| ◦ 160 MHz: 2 |
|
| Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. |
| Available transmit power settings (max/min), all antennas active |
5 GHz |
5/6 GHz |
| ● 23 dBm (200 mW) |
● 20 dBm (100 mW) |
| ● -7 dBm (0.2 mW) |
● -7 dBm (0.2 mW) |
Những đặc điểm nào giúp IW9165DH-ROW-URWP hoạt động ổn định trong môi trường ngoài trời?
IW9165DH-ROW-URWP đạt chuẩn IP66/IP67, hỗ trợ nhiệt độ hoạt động từ -40°C đến +60°C (hoặc đến +75°C khi cấp nguồn DC không có bức xạ mặt trời), chịu gió lên đến 257 km/h và tích hợp bảo vệ chống sét cho nguồn cùng cổng Ethernet. Các đặc điểm này giúp thiết bị vận hành bền bỉ trong các môi trường công nghiệp và hạ tầng ngoài trời khắc nghiệt.
IW9165DH-ROW-URWP khác gì so với IW9165E-ROW-URWB về khả năng triển khai?
IW9165DH-ROW-URWP được thiết kế cho môi trường ngoài trời với chuẩn IP66/IP67, hỗ trợ lắp đặt trên cột và sử dụng ăng-ten định hướng công suất cao. Trong khi đó, IW9165E-ROW-URWB có chuẩn IP30, thiết kế nhỏ gọn để lắp trên tường hoặc thanh DIN Rail, phù hợp hơn với các hệ thống công nghiệp trong nhà.
IW9165DH-ROW-URWP có ưu điểm gì khi triển khai các kết nối không dây điểm-điểm hoặc điểm-đa điểm?
IW9165DH-ROW-URWP được trang bị ăng-ten định hướng tích hợp 15 dBi với góc phủ hẹp 30° × 30°, giúp tập trung năng lượng phát sóng theo một hướng cụ thể. Nhờ đó, thiết bị phù hợp cho các kết nối điểm-điểm (Point-to-Point) hoặc điểm-đa điểm (Point-to-Multipoint), giảm nhiễu và tăng khoảng cách truyền dẫn.